51 71 406 Removing and installing/replacing rear spoiler

Necessary preliminary tasks: 

• Partially lower rear headlining (from B-pillar) and support. See HEADLINER (WITH SLIDE/TILT SUNROOF)  or HEADLINING (WITHOUT SLIDE/TILT SUNROOF) .

Slacken top nuts (1). Tightening torque: 4 Nm

Fig 1: Identifying Top Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lift out rear spoiler (1) in upward direction.

Fig 2: Lifting Out Rear Spoiler In Upward Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:  Seals around retaining bolt must not be damaged.