51 71 202 Removing and installing/replacing seal on clubdoor

WARNING: This page is about a different variant/trim than selected.

Release clip (1).

Feed seal (2) in direction of arrow out of clubdoor.

Installation:

If necessary, replace faulty clip (1).

Make sure seal (2) is correctly seated on clubdoor.

Fig 1: Ensure Seal (2) Is Seated On Clubdoor

Courtesy of BMW OF NORTH AMERICA, INC.

Detach seal (1) in direction of arrow from clubdoor.

Installation:

Make sure seal (1) is correctly seated in area (A) of door window and area (B) on clubdoor at bottom.

Fig 2: Ensuring Seal Is Correctly Seated In Area Of Door Window

Courtesy of BMW OF NORTH AMERICA, INC.