51 47 000 Removing and installing/replacing front left or right entrance cover strip

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Seat shown removed for purposes of clarity.
Before feeding out entrance cover strip, cover seat panel with cloth (risk of damage/scratching).

Release mucket (1).

Detach entrance cover strip (2) from clips (3).

Bend entrance cover strip (2) slightly and carefully feed out.

Fig 1: Identifying Entrance Cover Strip Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1 and 2) must not be damaged.

If necessary, replace faulty clips (3).

Fig 2: Identifying Guides (1 And 2) And Clips

Courtesy of BMW OF NORTH AMERICA, INC.