41 33 040 Replacing front wall

The following new body parts are required:

• Lock bridge (see "1" in illustration)
• Front panel (see "2" in illustration)
  Fig 1: Identifying Lock Bridge And Front Panel

  Courtesy of BMW OF NORTH AMERICA, INC.

Remove SUPPORT FOR BUMPER TRIM .

Release screws (1) on both sides of vehicle.

Tightening torque 51 11 7AZ

Release screws (2) on both sides of vehicle.

Tightening torque 41 33 4AZ

Fig 2: Identifying Front Panel Screws

Courtesy of BMW OF NORTH AMERICA, INC.