31 00... Notes on repairing threads

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine carrier may be repaired with Helicoil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Helicoil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants

Fig 2: Drilling Hole
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert

Fig 3: Creating Locating Thread For Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the table and screw into the locating thread until flush with the original thread

Fig 4: Identifying Helicoil Thread In Screw
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 5: Break Drive Pin And Remove
Courtesy of BMW OF NORTH AMERICA, INC.