84 21 535 Removing and installing/replacing hands-free charging electronics

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

NOTE: Comply with notes and instructions on handling optical waveguides. See NOTES ON HANDLING OPTICAL FIBRES and TREATING CABLES AND FIBER-OPTIC CABLES .

Necessary preliminary tasks:

Release screws (1) and remove cover (2) in direction of arrow.

Fig 1: Removing Cover With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screws (2).

Unlock retaining lug (3) and remove handsfree charging electronics (4).

Fig 2: Identifying Retaining Lug, Plug Connection, Screws And Handsfree Charging Electronics

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: