65 77 740 Removing and installing (replacing) left front door sensor

WARNING: This page is about a different variant/trim than selected.

WARNING: NOTE AIRBAG SAFETY INSTRUCTIONS !
Incorrect handling can activate airbag and cause injury!

Necessary preliminary tasks:

Release screw (1).

Tightening torque 65 77 2AZ .

Feed out sensor and disconnect plug connection (2).

Installation:

Make sure sensor is securely seated in door panel.

Sealing ring (3) must not be missing!

Fig 1: Identifying Plug Connection, Screw And Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.