63 13 200 Removing and installing/replacing front left or right side repeaters

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Slide cover with side repeater (1) forward and remove from side wall in the direction of the arrow.

Installation note:

Make sure the cover with side repeater (1) is correctly engaged on the side wall.

Fig 1: Sliding Trim With Auxiliary Direction Indicator Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip side repeater from cover (2) and remove.

Installation note:

Make sure that side repeater is correctly engaged on cover (2).

Replacement:

If necessary, remove BULB .

Fig 2: Identifying Auxiliary Direction Indicator With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.