63 21 180 Removing and installing/replacing left or right tail light

Necessary preliminary tasks: 

• Remove TRIM ON REAR LIGHT

Release screws (1). Tightening torque 63 21 2AZ .

Fig 1: Identifying Rear Light Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lever out rear light (1) with special tool 00 9 317 .

At same time lift rear light (1) in area (2) slightly and remove in direction of arrow.

Unlock plug connection behind and disconnect.

Fig 2: Removing Rear Light Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, remove BULBS