63 14 015 Removing and installing/replacing side marker lights on rear left or right
WARNING: This page is about a different variant/trim than selected.
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Partially remove REAR WHEEL ARCH COVER .
Turn bulb holder (1) in direction of arrow and pull out of side marker lamp (2).
Unscrew nut (3).
Remove side marker lamp (2) in direction of arrow from wheel arch trim (4).
Installation:
Journal (5) of side marker lamp (2) must first be inserted in wheel arch trim (4).
Make sure sealing ring is correctly fitted on BULB HOLDER (1).
Make sure bulb holder (1) is correctly latched on side marker lamp (2).