63 25 000 Removing and installing/replacing auxiliary brake light

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

Pull out auxiliary brake light (2) slightly in direction of arrow.

Fig 1: Pulling Auxiliary Brake Light

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove auxiliary brake light (2) towards top.

Installation:

Make sure plug connection (1) and sealing strips (3) are correctly seated.

Fig 2: Identifying Auxiliary Brake Light With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure seal (1) is correctly seated in auxiliary brake light (2).

Fig 3: Identifying Auxiliary Brake Light Seal

Courtesy of BMW OF NORTH AMERICA, INC.