62 10 100 Removing and installing/replacing steering column revcounter

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks

Disconnect plug connection (1).

Unlock plug housing catch at plug connection holder.

Detach plug housing from plug connection holder.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on back of revcounter (2) and remove.

Pull revcounter (2) in opposite direction to direction of travel and remove.

Installation:

Make sure revcounter wiring harness is correctly laid.

Fig 2: Identifying Revcounter With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.