35 31 000 Removing and installing or replacing clutch pedal

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Press pin (1) together and press out.

Detach locking clip (2).

Installation:

Check bearing bushes of clutch pedal and replace if necessary.

Lightly grease bearing bushes.

Check retaining clip (2) and replace if necessary.

Make sure retaining clip (2) is correctly engaged.

Fig 1: Identifying Pin, Retaining Clip And Return Spring

Courtesy of BMW OF NORTH AMERICA, INC.

Disengage return spring (3) and remove clutch pedal.