MSA function is deactivated by

WARNING: This page is about a different variant/trim than selected.

Deactivate MSA by means of button (1) in passenger compartment
Open seat belt buckle and driver's door

Fig 1: Identifying Automatic Engine Start/Stop Button

Courtesy of BMW OF NORTH AMERICA, INC.

Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
- Workshop mode
- Basic setting (engine hood/bonnet open)
  B = 7 mm
  
  To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.

Fig 2: Identifying Basic Setting For Engine Hood/Bonnet

G04796093

Courtesy of BMW OF NORTH AMERICA, INC.