61 61 270 Removing and installing or replacing console for windscreen washer system complete with motor

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unscrew nut (1). Tightening torque 61 61 2AZ .

Installation note:

Make sure holder is correctly positioned in relation to grommet.

Fig 1: Identifying Windscreen Wiper System Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1). Tightening torque 61 61 2AZ .

Disconnect plug connection (2).

Remove wiper bracket.

Fig 2: Identifying Wiper Bracket Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.