61 31 011 Removing and installing/replacing volute spring cassette

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

NOTE: Mark installation position of inner ring of volute spring to steering column switch cluster.

When replacing, carry over marking (2) to new part.

Fig 1: Identifying Marking On Steering Column Switch Cluster With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Expand catches (1) and remove volute spring cassette (2) from steering column switch cluster (3).

Fig 2: Identifying Volute Spring Cassette Of Steering Column Switch Cluster With Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guide pins (1) of volute spring must be correctly engaged in locators (2) for steering column switch cluster.

Fig 3: Identifying Guide Pins On Locators

Courtesy of BMW OF NORTH AMERICA, INC.