61 13 055 Removing and installing/replacing fuse box in engine compartment

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock catches (1) and remove fuse box cover (2).

Fig 1: Identifying Fuse Box Cover With Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and remove pole shoe.

Tightening torque 61 13 4AZ .

Release screws (2). Tightening torque 61 13 1AZ .

Raise fuse box.

Fig 2: Identifying Pole Shoe Screw And Fuse Box Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective cap (1).

Fig 3: Removing Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect all plug connections (1) on underside of fuse box.

Replacement:

Fig 4: Identifying Fuse Box Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.