61 35 070 Removing and installing/replacing module for folding exterior mirror

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .

Necessary preliminary tasks:

Unfasten plug connection (1) and disconnect.

Unscrew nuts (1).

Remove control unit for folding exterior mirror (3).

Fig 1: Identifying Exterior Mirror With Nut And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .

Necessary preliminary tasks:

Unscrew nuts (1).

Disconnect plug connection (2) and remove control unit for folding exterior mirror.

Fig 1: Identifying Exterior Mirror Nuts And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: