61 12 013 Replacing battery negative lead
WARNING: This page is about a different variant/trim than selected.
WARNING:
Observe safety information for handling vehicle battery. See SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY and (SAFETY) INFORMATION ON AGM BATTERY .
Follow instructions for DISCONNECTING AND CONNECTING BATTERY .
Necessary preliminary tasks:
- Remove RIGHT COWL PANEL COVER
Loosen nut (1). Tightening torque 61 21 1AZ .
Disconnect battery negative lead (3) from battery.
Version with intelligent battery sensor (IBS) :
Detach plug connection from IBS.
Slacken nut (2). Tightening torque 61 21 4AZ .
Feed out battery negative lead (3) and remove.