51 23 215 Removing and installing/replacing cable for front hood/bonnet locks (in engine compartment) on right and left

Necessary preliminary tasks: 

• Remove both engine compartment lid catches. See RIGHT ENGINE COMPARTMENT LID LOCK  or LEFT ENGINE COMPARTMENT LID LOCK .

Unclip coupling (1) from lock carrier (2).

Open coupling (1) and disengage cable (3).

If necessary, release cable (4) from retainers at lock carrier (2).

Feed out coupling (1) with cable (4).

Fig 1: Identifying Coupling, Lock Carrier And Cable

Courtesy of BMW OF NORTH AMERICA, INC.