Vertical adjustment (A) (retraction depth)

WARNING: This page is about a different variant/trim than selected.

NOTE: 3 items of special tool 51 3 080 are required for rapid adjustment of retraction depths.

Fig 1: Identifying Special Tool (51 3 080)

Courtesy of BMW OF NORTH AMERICA, INC.

Ideal adjustment:

Measure retraction depth in areas (1 and 2).

Dimension (c) = 6 ± 1.5 mm

Fig 2: Identifying Retraction Depth

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken washers (1) of side window (2) with special tool 51 3 240 (do not release fully).

Adjust height (A) of side window (2).

Tighten down washers (1) with special tool 51 3 240.

Tightening torque 51 37 2AZ

Fig 3: Removing Side Window Washer Using Special Tool 51 3 240

Courtesy of BMW OF NORTH AMERICA, INC.