Parallelism (B) (window tilt)
WARNING: This page is about a different variant/trim than selected.
Ideal adjustment:
Side window top edge (1) must be parallel to contour of seal (2).
Close side window glass and mark along seal (2) at bottom and top with a water-soluble marker pen.
NOTE:
Clean side window.
Slacken washers (1) of side window (2) with special tool 51 3 240 (do not release fully).
Adjust side window (2) by turning (B).
Tighten down washers (1) with special tool 51 3 240.
Tightening torque 51 37 2AZ