51 14... Instructions for attaching number/letter designation combination: Assembly

WARNING: This page is about a different variant/trim than selected.

Number and letter combinations (1) of the model designation are not connected to each other and are supplied on a carrier film (2).

IMPORTANT: Adhesive areas must be dry and free of dust and grease.

Once it has been cleaned, do not touch the adhesive area with bare hands.

Fig 1: Identifying Letter Combinations, Liner And Backing Film

Courtesy of BMW OF NORTH AMERICA, INC.

Remove liner (3) (protective strip for adhesive surface).

Firmly press down model designation.

Remove carrier film (2).