23... Universal MINI transmission bracket

WARNING: This page is about a different variant/trim than selected.

NOTE:

Suitable for manual and automatic transmissions

IMPORTANT: Supports (1) can be laterally adjusted by means of screws (2).
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.

Fig 1: Identifying Rear Support With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Supporting transmission:

Support transmission with special tools 23 4 150 , 00 2 030 .

Joint (1) for height adjustment.

Joint (2) for inclination angle adjustment.

IMPORTANT: Transmission must be secured with tensioning strap (3).

Fig 2: Supporting Transmission Using Special Tools (23 4 150 And 00 2 030)

Courtesy of BMW OF NORTH AMERICA, INC.