24 21 230 Removing radial shaft seal of right axle shaft (AISIN)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Necessary preliminary tasks:

Drive a hole into radial shaft seal using a center punch.

IMPORTANT: Do not use a drill as drillings may result in transmission malfunction.

Screw special tool 23 0 490 into radial shaft seal.

Drive out radial shaft seal (1) with impact weight (2).

Fig 1: Identifying Special Tool (23 0 490) And Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat sealing lips of new radial seal with clean transmission oil.

Drive radial shaft seal (1) firmly home with special tool 24 4 300 .

Fig 2: Identifying Special Tool (24 1 390 And 24 4 300) And Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.