24 31 151 Removing and installing/replacing transmission fluid strainer (AISIN)
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
After completion of work, check TRANSMISSION FLUID LEVEL
.
Use only the approved OPERATING FLUID in this automatic transmission.
Use only the approved OPERATING FLUID in this automatic transmission.
Failure to comply with this requirement will result in serious damage to the automatic transmission!
Necessary preliminary tasks
- Remove TRANSMISSION FLUID SUMP
Release screws (1).
Remove fluid strainer.
Tightening torque 24 11 10AZ .
Installation:
Clean contact surfaces.