Removing wheel arch

WARNING: This page is about a different variant/trim than selected.

Open welded connections in area (1).

Fig 1: Identifying Welded Connections Area

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Fig 2: Identifying Welded Connections Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Fig 3: Identifying Welded Connections Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Fig 4: Identifying Welded Connections Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Mark severance cut (1) before dia. 20 mm hole and cut.

Open welded connections in area (2).

Remove the wheel arch.

Fig 5: Identifying Severance Cut Mark

Courtesy of BMW OF NORTH AMERICA, INC.