11 13 000 Removing and installing, sealing or replacing oil sump (N12)

Necessary preliminary tasks: 

• Drain ENGINE OIL .

Release oil sump bolts in area of line (1).

Tightening torque: 11 13 2AZ .

Fig 1: Removing Oil Sump Bolts In Area Of Line

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) over exhaust manifold with special tools 11 9 582 and 11 9 581.

Tightening torque: 11 13 2AZ .

Fig 2: Removing Exhaust Manifold Screw Using Special Tools (11 9 582) And (11 9 581)

Courtesy of BMW OF NORTH AMERICA, INC.

Clean sealing face (1) with special tool 11 4 470.

Fig 3: Identifying Sealing Face

Courtesy of BMW OF NORTH AMERICA, INC.

Remove protruding or surplus sealing beads (1) with a suitable tool.

Installation: 

Do not use liquid seal.

A metal substrate gasket is available for repairs.

Fig 4: Identifying Surplus Sealing Beads

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.