LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 233 (Wheel And Tires - Repair - Convertible (R57)) >> 3611 Disc Wheels (Rims) >> 36 11 533 Removing and installing/replacing RDC wheel electronics (2nd generation/3rd generation) >> Labelling of generation 2.3 wheel electronics

Labelling of generation 2.3 wheel electronics

WARNING: This page is about a different variant/trim than selected.
  1. Transmission frequency of electronic wheel module
  2. Large Torx socket screw
  3. BMW part number
  4. Tightening torque of Torx screw and union nut
  5. Width across flats of union nut
  6. Serial number of electronic wheel module
  7. Production date of electronic wheel module
Fig 1: Identifying Labels On Gen3 Electronic Wheel Module (SP303 RDC-01 And RDC-02)
G04726746Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: The following illustrations only show removal and refitting of the 3rd generation wheel module. The instructions also apply without alteration to the wheel module SP303.
scientia non olet · About LEMON Manuals