36 00... General information on light alloy disc wheels
WARNING: This page is about a different variant/trim than selected.
NOTE:
It is sometimes difficult to distinguish light alloy disc wheels visually from steel disc wheels.
Identifying features:
- Sticker on light alloy disc wheel. (1) = Indication "Aluminum"
- Wall thickness of rim dish: approx. 8 mm.
- Light alloy disc wheels are not magnetic.
- Light alloy disc wheels can be identified from their BMW parts numbers.
IMPORTANT:
- Use only BMW-approved two-part balancing weights.
- When fitting two-part balancing weights, always use specified tools.
- Do not straighten light alloy disc wheels: always replace damaged light alloy disc wheels.
- Notches in light alloy disc wheels can lead to cracking.
- Do not lubricate wheel nuts.
- When fitting tires, avoid damaging light alloy disc wheels, e.g. on sharp-edged retaining claws on fitting machine.