36 10 209 Checking front and rear wheel for face and radial runout

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Lift vehicle.

Check wheel with special tool 36 1 030 (measuring fixture) for lateral runout.

Fig 1: Check Wheel Lateral Runout Using Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Check wheel with special tool 36 1 030 (measuring fixture) for radial runout.

Fig 2: Check Wheel Radial Runout Using Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

If applicable, remove balance weights.

Check lateral runout of rim with special tool 36 1 030 (measuring fixture).

Fig 3: Check Rim Lateral Runout Using Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.

Check radial runout of rim with special tool 36 1 030 (measuring fixture).

Fig 4: Check Wheel Rim Radial Runout Using Special Tool (36 1 030)

Courtesy of BMW OF NORTH AMERICA, INC.