64 11 212 Removing and installing/replacing heater/air conditioner blower

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work

Release screws (1) and remove cover (2).

Fig 1: Identifying Heater/Air Conditioner Blower Cover With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For purposes of clarity, illustration shows dashboard removed.

Disconnect plug connection (1).

Release screws (2) and feed out blower (3).

Fig 2: Identifying Blower With Plug Connection And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.