64 11 210 Removing and installing/replacing heater blower

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work

Release screws (1) and feed out cover (2) towards bottom.

Fig 1: Identifying Heater Blower Cover With Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Blower (1) is located above accelerator pedal on bulkhead.

Fig 2: Identifying Blower

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For purposes of clarity, illustration shows instrument panel removed.

Disconnect plug connection (1).

Release screws (2) and feed out blower (3).

Fig 3: Identifying Blower With Plug Connection And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.