23... Universal MINI transmission bracket

WARNING: This page is about a different variant/trim than selected.

Special tools required:

00 2 030
23 4 150

NOTE:

Suitable for manual and automatic transmissions

IMPORTANT: Supports (1) can be laterally adjusted by means of screws (2).
Carrier (3) of rear supports (1) can be longitudinally adjusted by means of screw.
Supports must be adapted in length and width to the transmission.

Fig 1: Identifying Support Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Supporting transmission:

Support transmission with special tools 23 4 150, 00 2 030.

Joint (1) for height adjustment.

Joint (2) for inclination angle adjustment.

Fig 2: Special Tools (23 4 150, 00 2 030)

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Transmission must be secured with tensioning strap (3).