Bleeding rear axle brake circuit

WARNING: This page is about a different variant/trim than selected.

Connect bleeder hose with collecting tray to bleeder valve on rear right brake caliper.

Close vent valve.

Run bleeding routine with DIS with bleeder valve open.

Fig 1: Connecting Bleeder Hose With Collecting Tray To Bleeder Valve On Rear Right Brake Caliper

Courtesy of BMW OF NORTH AMERICA, INC.

After completing routine, press brake pedal 5 times to floor; clear and bubble-free brake fluid must flow out.

Close vent valve.

Repeat procedure at rear left.