00 00 614 Service - rear brakes

Remove rear brake pads. For details on how to proceed, refer to

• REMOVING AND INSTALLING/REPLACING BRAKE PADS ON BOTH REAR DISC BRAKES
  • Clean brake air duct
  • Apply a thin coat of grease to wheel centering on light alloy wheels.
• Replace brake discs if they are below the MINIMUM BRAKE DISC THICKNESS and if scoring, heat cracks or thickness difference are detected.
• Check handbrake for correct function, adjust if necessary. See PARKING BRAKE FUNCTION CHECK and ADJUSTING HANDBRAKE .
• Reset service display according to factory specification.