72 12 Gas generator, unit for front passenger side
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - GAS GENERATOR, UNIT FOR FRONT PASSENGER SIDE
| Type | Tightening specifications | Dimension | |
|---|---|---|---|
| 1AZ Passenger airbag module to instrument panel carrier | R50/R53 | 10 Nm | |
| R52 | 3.3 Nm | ||
| - on dashboard | R55/R56/R57/R60 | 9 Nm | |
| 2AZ Self-locking nut for gas generator - ITS head airbag | R50/R53 | 6 Nm | |
| 3AZ Bracket for gas generator tube - ITS head airbag | R50/R53 | 3.5 Nm | |
| 4AZ Fastening belt to A- and C-pillars - head airbag | R50/R53 | 11 Nm | |
| 5AZ Head airbag, retaining clip and panel to bracket - B-pillar | R50/R53 | 6 Nm | |
| Head airbag for ramp to body (B-pillar) | R56/R55 | 8 Nm | |
| 6AZ Side airbag (front seat) to backrest frame | R50/R52/R53 | Replace screw. | 6 Nm |
| R55/R56/R57 | Replace screw. | 6.5 ±0.5 Nm | |
| R60 | Replace nut. | 6.5 Nm | |
| 7AZ Holder, front passenger airbag to instrument panel carrier | R50/R52/R53/R55/R56/R57/R60 | 6 Nm | |
| 8AZ Head airbag screw points | R60 | 5 Nm |