65 77 Airbag control unit and airbag sensors
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - AIRBAG CONTROL UNIT AND AIRBAG SENSORS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Airbag control unit | R50, R52, R53 | 8.8 Nm | ||
| R55, R56, R57 | 8 Nm | |||
| R60 | M6 | 10 Nm | ||
| 2AZ Sensor, door to door panel | R50, R52, R53 | Replace screws | 5.5 Nm | |
| R55, R56, R57/R60 | Replace screws | 8 Nm | ||
| 3AZ Sensor, B-pillar | R55, R56, R57/R60 | Replace screws | 8 Nm | |
| 4AZ Acceleration sensor to engine support (upfront sensor) | R52, R55, R56 R60 | M6 | Replace screws Replace screws |
8 Nm 9 Nm |