52 26 Rear seats (through-loading system)
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - REAR SEATS (THROUGH-LOADING SYSTEM)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Lock to backrest | R55/R56/R57 | M8 x 34 | 19 Nm | |
| 2AZ Central hinge, middle, to body | R55/R56/R57 | 29 Nm | ||
| 3AZ Cover, central hinge, to backrest | R55/R56/R57 | M4 | 2 Nm | |
| 4AZ Closing bar | R55/R56 | 19 Nm | ||
| R57 | 32 Nm | |||
| 5AZ Fastening, striker -side to rollover bar | R57 | 18 Nm | ||
| 6AZ Rear seat to floor panel | R60 | (trilobular) | Replace Powerlock screw | 45 Nm |