22 11 070 Removing and installing/replacing engine mounting bracket

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Support engine and transmission with engine crane

Suspend engine crane (1) from lifting eye (2).

Fig 1: Identifying Engine Crane And Lifting Eye

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove grounding strap.

Tightening torque 22 11 7AZ .

Unfasten screws (2).

Tightening torque 22 11 2AZ .

Unscrew nut (3).

Tightening torque 22 11 1AZ .

Remove engine support bracket.

Fig 2: Identifying Grounding Strap Nut

Courtesy of BMW OF NORTH AMERICA, INC.