51 24 Rear lid lock, locks
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - REAR LID LOCK, LOCKS
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Lock to body | R50/R53/R56 | 9 Nm | ||
| R60 | 19 Nm | |||
| 2AZ Lock pin to tailgate | R50/R53/R56 | 9 Nm | ||
| R60 | M8 | 28 Nm | ||
| 3AZ Lock to tailgate | R52 | 7.6 Nm | ||
| R57 | M6 | 10 Nm | ||
| 4AZ Bowden cable, retractor, to body | R52 | 18.5 Nm | ||
| 5AZ Bowden cable, retractor, to tailgate | R52 | 7.6 Nm | ||
| 6AZ Retractor to tailgate | R52 | 7.6 Nm | ||
| R57 | 8.0 Nm | |||
| 7AZ Lock to split door | R55 | M6 | 9 Nm | |
| 8AZ Striker to split door | R55 | M6 | 19 Nm | |
| 9AZ Outer door handle to split door | R55 | M6 | 5 Nm | |
| 10AZ Holder for trim to split door | R55 | M6 | 9 Nm | |
| 11AZ Striker to body | R57 | 20 Nm | ||
| 12AZ Rear lid lock (electric motor) | R57 | 8.5 Nm | ||
| 13AZ Button on tailgate | R60 | M5 | 4.6 Nm | |
| 14AZ Ball stud to body/split door (gas pressure spring) | R55 | 18.5 Nm |