51 12 Rear Bumper
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - REAR BUMPER
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Support to body |
R50/R52/R53 |
M8 x 25 |
|
12.5 Nm |
| R55/R56/R57 |
|
|
21 Nm |
| R60 |
Nut |
|
62 Nm |
| 2AZ Bracket, side bumper |
R60 |
Screw |
|
2 Nm |
| 3AZ Centre bumper holder |
R60 |
Screw |
|
2 Nm |