51 71 Gaskets and loose body components
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - GASKETS AND LOOSE BODY COMPONENTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel arch trim to body | R50, R52, R53 | 3 Nm | ||
| 2AZ Trailing link to sill and trailing link fixture | R52, R57 | M10 | Replace screws Jointing torque Angle of rotation |
56 Nm 45° |
| 3AZ Rear spoiler to holder, rear spoiler | R53/Amper | 5 Nm | ||
| 4AZ Holder, rear spoiler to tailgate | R53/Amper | 4 Nm | ||
| 5AZ Load bar to retaining bracket | R53/Amper | 8 Nm | ||
| 6AZ Retaining bracket with counter-support plate to body | R53/Amper | 12 Nm | ||
| 7AZ Rear spoiler to tailgate | R56 | 4 Nm | ||
| R60 | M6 | 4 Nm | ||
| 8AZ Connection carrier to body | R55, R56 | 19.5 Nm | ||
| 9AZ Lashing eye to body | R55, R56 | 6 Nm | ||
| 10AZ Rear spoiler to roof | R55 | 4 Nm |