51 21 Front Door Locks
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - FRONT DOOR LOCKS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Outer door handle to front door | R50/R52/R53/R55/R56/R57 | 4 Nm | ||
| R60 | Sheet metal screw | 3.5 Nm | ||
| 2AZ Door lock pin to body | R50/R52/R53 | 10 Nm | ||
| R55/R56/R57 | 19 Nm | |||
| 3AZ Door lock cylinder to front door | R50/R52/R53 | 6 Nm | ||
| R55/R56/R57 | 9 Nm | |||
| 4AZ Door lock to front door | R50/R52/R53/R55/R56/R57 | 6 Nm | ||
| R60 | 10 Nm | |||
| 5AZ Door locking lever to door lock | R50/R52/R53/R55/R56/R57 | 3 Nm | ||
| 6AZ Door stop to A-pillar | R50/R52/R53/R55/R56/R57/R60 | 23 Nm | ||
| 7AZ Door stop to door | R50/R52/R53/R55/R56/R57/R60 | 10 Nm | ||
| 8AZ Striker to body | R60 | 18.5 Nm |