37 14 Electric components
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ELECTRIC COMPONENTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Ride height sensor to holder | R55/R56/R57 | M5 | 4.4 Nm | |
| R60 | M5 | 4.6 Nm | ||
| 2AZ Ride height sensor holder to front axle support | R55/R56/R57/R60 | M6 | 7.6 Nm | |
| 3AZ Ride height sensor holder to rear axle support | R55/R56/R57/R60 | M6 | 7.6 Nm | |
| 4AZ Jointed rod to ride height sensor/holder | R55/R56/R57 | M6 | Replace nut. | 7.2 Nm |
| R60 | M6 | Replace nut. | 7.6 Nm | |
| 5AZ Holder to wishbone | R55/R56/R57 | M6 | 6 Nm | |
| R60 | M6 | 8 Nm |