34 21 Rear Brake
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - REAR BRAKE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub (contact surfaces between brake disc and wheel hub clean and grease-free) | R55/R56/R57 | Torx screw M10 x 13 | Replace bolts | 27 Nm |
| R60 | M8 x 14 | Schrauben erneuern | 16 Nm | |
| 2AZ Brake caliper to wheel carrier | R55/R56/R57 | M10 | Replace self-locking or microencapsulated screws | 65 Nm |
| R60 | M12 x 30 | Selbstsichernde oder mikroverkapselte Schrauben erneuern | 100 Nm | |
| 3AZ Guide bolts (hexagon screw) | R55/R56/R57/R60 | WAF 13 | Replace self-locking or microencapsulated screws | 35 ± 3 Nm |
| 4AZ Brake guard plate, rear, to trailing arm | R60 | M6 x 12 | Replace self-locking or microencapsulated screws | 12 Nm |