33 55 Anti-roll bar
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Anti-roll bar link to anti-roll bar | R55/R56/R57 | M10 | Replace nut | 56 Nm |
| 2AZ Anti-roll bar link to trailing arm | R55/R56/R57 | M10 | Replace nut | 56 Nm |
| 3AZ Retaining bracket, anti-roll bar to rear axle support | R55/R56/R57 | M8 | 19 Nm |