32 31 Steering Column
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - STEERING COLUMN
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Lower steering column shroud to steering column | R56/R55/R57/R60 | 4 Nm | ||
| 2AZ Lower steering shaft to steering box | R56/R55/R57 | Clean thread and remove remains of screw locking Replace screw |
28 Nm | |
| R60 | Clean thread and remove remains of screw locking Replace screw Jointing torque Angle of rotation |
25 Nm 90 ° |
||
| 3AZ Steering column to cross member | R56/R55/R57 | 35 Nm | ||
| R60 | 24 Nm |