32 21 Drop Arm
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - DROP ARM
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Track rod end to swivel bearing | R55/R56/R57/R60 | M12 | Replace nut | 65 Nm |
| R60 | Jointing torque Angle of rotation Replace nut |
30 Nm 90° |
||
| 2AZ Track rod end to track rod | R55/R56/R57/R60 | Replace nut | 27.5 Nm | |
| 3AZ Track rod to steering box | R55/R56/R57/R60 | 76.5 Nm |