31 21 Wheel Bearings and Steering Stub
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS AND STEERING STUB
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to swivel bearing | R55/R56/R57 | M10 | Replace screws. Jointing torque Angle of rotation |
20 Nm 90° |
| R60 | M12 | Replace screws. Tighten crosswise. Jointing torque Final torque |
30 Nm 120 Nm |